 |
|
Browse: |
|
|
Search: |
Type: All
|
Last Modify: 2023/06/03
|
Shipping, tax, and handling costs is not included in the price.
|
Model
No. | Mark Levinson ML-6A Mono Preamplifier |
Description
|
Very rare and very hard to find late version Mark Levinson ML-6A mono preamplifier.
*****Inside parts are all original*****
Serial number: Maim frame #5320 & #5321
Power supply #5540 & #5541
Comes with L3A MC phono section and L1 line drive section and 2x original DC cords.
More sample photos please visit:
https://topclassaudio.com/web/eng/used_product_details.jsp?gid=8761
and
https://topclassaudio.com/web/eng/used_product_details.jsp?gid=8762
|
Condition | 9 / 10 |
Retail
Price (HKD) | 68,000.00 |
Retail
Price (USD) | 9,007.00 |
Qty | One set |
Status |  |
|
|
|
|
Model
No. | A & E Technical Research E-3000 Preamplifier |
Description
|
A & E Technical Research E-3000 full version preamplifier.
Type: Preamplifier with MM / MC phono section
Input: PHONO, AUX 1 & 2, TAPE
Pre output: BNC and RCA
REC output: x2
Input impedance:
PHONO: 68k, 47k, 33k, 22k, 10k, 1k, 600, 330,
100, 50, 10 ohm select
AUX, TAPE: 47k ohm
Input sensitivity:
PHONO: 10mV, 3.2mV, 1mV, 0.3mV, 0.1mV
AUX, TAPE:¡@0.5V
Maximum allowable input voltage:
PHONO: 100mV, 32mV, 10mV, 3mV, 1mV
Gain ( ) is at 75 ohm load:
PHONO: 40dB(34dB), 50dB(44dB), 60dB(54dB), 70dB(64dB), 80dB(74dB)
AUX, TAPE:¡@6dB(0dB)
Maximum output voltage:
Preout: 10Vrms
REC out: 10Vrms
Otput impedance:
Preout:75 ohm
REC out: 75 ohm
Otimum load impedance:
Preout: 75 ohm or more
REC out: 600 ohm or more
Frequency characteristic:
PHONO to preout: 0.5~200kHz
AUX, TAPE to preout: DC~500kHz
Total harmonic distortion(20Hz~0kHz):
PHONO to preout: Within 0.005%
AUX, TAPE to preout: Within 0.01%
S/N ratio:
PHONO: 70dB (when gain is 80,70dB), 80dB (when gain is 60, 50, 40dB)
AUX,TAPE to preout: 80dB
Crosstalk:
PHONO to preout: 80dB(20kHz)
AUX,TAPE to preout: 70dB(20kHz)
Equalizer deviation: Within +/- 0.2dB
Power consumption: 15VA
AC voltage: AC-220V 50/60Hz
Dimensions: W480x H85x D300mm
|
Condition | 8.5 / 10 |
Retail
Price (HKD) | 16,800.00 |
Retail
Price (USD) | 2,225.00 |
Qty | One |
Status |  |
|
|
|
|
Model
No. | JBL 4313BWX Studio Monitor Speaker System |
Description
|
Rare JBL 4313BWX Studio Monitor speaker system.
Type: Three ways three units
Woofer: 25cm cone (LE111H)
Midrange: 13cm cone (LE5-9)
Tewwter: 2.5cm dome (066)
Crossover frequencies: 1kHz & 4kHz
Frequency response: 40~18,000Hz +/- 3dB
Impedance: 8 ohm
Max handle power: 40W (RMS)
Sensitivity: 89dB/W/m
Input level adjust: High & midrange
Dimensions: W36.2x H59.7x D25.2cm
Net weight: 21.0kg (Each)
|
Condition | 9 / 10 |
Retail
Price (HKD) | 8,800.00 |
Retail
Price (USD) | 1,166.00 |
Qty | PAIR |
Status |  |
|
|
|
|
Model
No. | JBL L-112 Speaker System Pair |
Description
|
JBL L-112 speaker system pair.
Type: 3 ways 3 units bass reflex speaker system
Recommended Amplifier: 10 to 300W
Crossover Frequency: 1100, 3700Hz
Input impedance: 8 ohm
Sensitivity: 89dB
Woofer: 1x 300mm cone
Midrange: 1x 130mm cone
Tweeter: 1x 25mm dome
Finish: Oiled walnut
Dimensions: H622x W362x D333mm
Net weight: 25kg (Each)
|
Condition | 8.5 / 10 |
Retail
Price (HKD) | 7,800.00 |
Retail
Price (USD) | 1,033.00 |
Qty | Pair |
Status |  |
|
|
|
|
Model
No. | Sony TTS-8000 w/ Lead Console LAB III Set |
Description
|
Sony TTS-8000 with Lead Console LAB III turntable set.
Sony TTS-8000
Type: Direct drive Crystal Locked turntable
Turntable platter: 320mm aluminium alloy diecast
Drive system: DC servo controlled motor
Control system: crystal lock system
Speeds: 33 1/3 and 45rpm
Speed control range: +/- 4%
Wow and flutter: 0.025% WRMS
S/N ratio: >70dB
Dimensions: W370x H130x D395mm
Net weight: 9.9kg
AC voltage: AC-100V 50/60Hz
Lead Console LAB-III
Type: Turntable plinth
Material: Lead, ply wood and damping coating
Dimensions: W63.2x D57.2cm
Pre-drilled turntable mount hole: Sony TTS-8000 or TTS-6000
Pre-drilled arm mount holes:
First arm position -- SME 9" or 10", SAEC WE-308, WE-308NEW, WE-308SX, WE-407/23, WE-407TM, WE-407EX, WE-317, WE-317S
Second arm position -- Ortofon RF-297, EMT 997 or Thorens TP-997 and Audio Technica AT-1501, AT-1501 II or Tokyo Sound ST-1600
Third arm position -- Ortofon AS-212, RS-212, RS-212 Special, RMG-212 or RMA-212
Net weight: Around 25kg
For sell item are Sony TTS-8000 and Lead Console LAB III only not included SAEC WE-308SX, Audio Technica AT-1501 II, Ortofon RMG-212 tonearms, Onlife OMC-22, Audio Technica AT36E, Ortofon SPU GT, Audiocraft TM-300 turntable mat and Audiocraft SD-33/SB-33 disc stabilizer which shown on sample photos.
|
Condition | 8.5 / 10 |
Retail
Price (HKD) | 14,800.00 |
Retail
Price (USD) | 1,960.00 |
Qty | One Set |
Status |  |
|
|
|
|
Model
No. | Clearaudio Outer Limit Record Stabilizer |
Description
|
Clearaudio Outer Limit Record Stabilzier.
The precision milled Outer Limit improves vinyl replay by adding clamping the edge of the rexord, with its 1.5kg weight adding to the flywheel effect and flattening minor warps leading to a significant sonic improvement on your Clearaudio turntable or if your turntable can match it's inner dimensions also can use.
Inner diameter in mm from top to bottom:
339
318
303
300
Material: Stainless Steel
Net weight: 1.5kg
|
Condition | 8.5 / 10 |
Retail
Price (HKD) | 4,800.00 |
Retail
Price (USD) | 636.00 |
Qty | One |
Status |  |
|
|
|
|
Model
No. | SME 3009 S III Knife Edge Tonearm |
Description
|
SME 3009 S III knife edge tonearm. Comes with original user manual, alignment protector, extra 4x lead sheets for counterweight and original output cord.
Type: Knife edge support with fluid damp
Effective length: 229mm
Stylus pressure range: 0~2.5 gram in 0.25 gram steps
Arm height adjust range: 60.3~82.6mm
Handle cartridge weight range: 2~12.5 gram
For sell item not included SME arm platform which shown on sample photos.
|
Condition | 8 / 10 |
Retail
Price (HKD) | 5,800.00 |
Retail
Price (USD) | 768.00 |
Qty | One |
Status |  |
|
|
|
|
Model
No. | SME 3009 S II Improved Knife Edge Tonearm |
Description
|
SME 3009 Series II Improved knife edge support tonearm. Comes with original user manual, alignment protector, S2 headshell and original output cord.
Type: Knife Edge support tonearm
Effective length: 231.2 mm
Overhang: 15.8mm
Stylus pressure range: 0~1.5g / 0.25g step
Arm height adjust range: 62~79.5 mm
For sell item not included SME arm platform which shown on sample photos.
|
Condition | 8 / 10 |
Retail
Price (HKD) | 4,800.00 |
Retail
Price (USD) | 636.00 |
Qty | One set |
Status |  |
|
|
|
|
Model
No. | High Tech Audio Light Shadow Tonearm Photos |
Description
|
Add sample pictures of High Tech Audio Light Shadow oil damped Marble Tonearm.
More detail information and sample pictures please visit:
http://www.topclassaudio.com/web/eng/used_product_details.jsp?gid=7355
|
Condition | xx / 10 |
Retail
Price (HKD) | xx |
Retail
Price (USD) | xx |
Qty | xx |
Status |  |
|
|
|
|
Model
No. | High Tech Audio Light Shadow Marble Tonearm |
Description
|
Very rare and nearly impossible to find Japanese HIGH END audiophile product High Tech Audio Light Shadow oil damped Marble tonearm.
Retail price when NEW as 495,000yen
Type: Oil damped one point support tonearm
Effective length: 237mm
Overhang: 15mm
Arm material: Natural marble, lead, steel and GUN METAL
Inner lead material: Silver (same grade of Fidelity Research FR-64s)
Output socket: Standard 5 DIN
More detail sample pictures, please visit:
http://www.topclassaudio.com/web/eng/used_product_details.jsp?gid=7356
|
Condition | 9 / 10 |
Retail
Price (HKD) | 16,800.00 |
Retail
Price (USD) | 2,225.00 |
Qty | ONE |
Status |  |
|
|
|
|
|
 |
 |
 |
 |
 |
 |
Negotiated |
Sold |
Consigned |
Reserved |
New |
Used |
|
Goods sold are not returntable. Subject to terms and conditions exchange of goods can be considered. |
|